- Home >
- Products >
- Special optical fiber >
- Polarization-Maintaining Photonic Crystal Fiber (PM-PCF)

Polarization-Maintaining Photonic Crystal Fiber (PM-PCF)
Polarization-maintaining photonic crystal fiber (PM-PCF) is a microstructured optical fiber for polarization-sensitive gyroscope, laser and sensing designs. Select the operating wavelength, beat length, crosstalk and cladding/coating geometry together, then confirm the test conditions for the delivered fiber.
The air-hole geometry and glass structure create birefringence that separates the two polarization axes. This differs from conventional stress-applying-part PANDA fiber. Compare the complete optical and mechanical specification rather than assuming that a shorter beat length alone guarantees higher finished-assembly PER.
Product Features
- ✔Good radiation resistance
- ✔The beat length is adjustable
- ✔High birefringence effect
- ✔Good temperature performance
Product Application
- ✔Fiber optic gyroscope
- ✔Polarization device
- ✔Laser
Optical Fiber Structure

Product Specification
| Properties | Unit | Product Type PM-PCF15G-100-U13 | Product Type PM-PCF15G-125-U25 | Product Type PM-PCF15G-125-U25 | Product Type PM-PCF15G-80-U16 |
|---|---|---|---|---|---|
| Optical Properties | |||||
| Working wavelength | nm | 1550 | 1550 | 1550 | 1550 |
| Mode field diameter | μm | 4.1 ± 1.0 | 4.0 ± 1.0 | 4.0 ± 1.0 | 4.0 ± 1.0 |
| Attenuation | dB/km | ≤ 2.0 | ≤ 2.0 | ≤ 2.0 | ≤ 2.0 |
| Beat Length | mm | ≤ 5.0 | ≤ 3.0 | ≤ 3.0 | ≤ 3.0 |
| Typical crosstalk @1550nm(100m) | dB | ≤ -15 | ≤ -30 | ≤ -30 | ≤ -30 |
| Temperature circulation -45℃~85℃ crosstalk fluctuation @1550nm(1Km) | dB | ≤ 2.0 | ≤ 3.0 | ≤ 3.0 | ≤ 3.0 |
| Geometric Properties | |||||
| Cladding diameter | μm | 100.0 ± 1.0 | 125.0 ± 1.0 | 80.0 ± 1.0 | 80.0 ± 1.0 |
| Coating diameter | μm | 135.0 ± 5.0 | 245.0 ± 5.0 | 165.0 ± 5.0 | 165.0 ± 5.0 |
| Cladding out-of-roundness | % | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 |
Customized Information
- ✔Polarization-maintaining photonic crystal fibers with specific beat lengths and bands can be customized.
- ✔Polarization-maintaining photonic crystal fibers with specific cladding diameter and duty cycle can be customized.
Notices
In order to prevent moisture and dust from entering the hollow microtubule to affect the later performance, both ends of the polarization-maintaining photonic crystal fiber must be sealed.
PM-PCF vs PANDA: Select by Measured Requirements
PM-PCF uses microstructured geometry to obtain birefringence; conventional PANDA fiber uses stress-applying parts. Neither structure is universally superior. Select by wavelength, optical loss, polarization coupling, bend conditions and the required environmental qualification.
Temperature-cycle crosstalk data apply to the stated wavelength and test length. Radiation-related requirements need an agreed dose, exposure conditions and retained-performance acceptance plan; no universal radiation rating is implied by the fiber structure.
Polarization-Maintaining Photonic Crystal Fiber Buyer Guide
Polarization-maintaining photonic crystal fiber (PM-PCF) combines a microstructured cladding with strong birefringence to reduce coupling between polarization states. It is intended for polarization-sensitive 1550 nm systems, fiber-optic gyroscopes, laser systems and precision sensing.
How to Select a PM-PCF Model
- Confirm the 1550 nm operating band and source characteristics.
- Select the cladding and coating dimensions that match the handling and component design.
- Review mode-field diameter, attenuation, beat length and crosstalk together.
- Define bend conditions, temperature cycling and required test length.
Information to Include in Your RFQ
- Source wavelength, spectral width and optical power
- Required cladding and coating dimensions
- Beat-length, crosstalk and attenuation targets
- Bend radius, routing and operating-temperature range
- Fiber length, quantity, packaging, documentation and destination
Frequently Asked Questions
How does PM-PCF differ from conventional Panda PM fiber?
PM-PCF uses a microstructured cladding and a large refractive-index contrast to generate strong birefringence, while Panda fiber relies on stress-applying parts. Selection depends on wavelength, bend sensitivity, polarization performance, handling and integration requirements.
Which parameters are most important for PM-PCF selection?
Operating wavelength, mode-field diameter, attenuation, beat length, crosstalk, cladding size, coating size, bend conditions and environmental requirements should be evaluated as a set.
What test information should be specified?
State the required test wavelength and length, crosstalk or extinction target, temperature-cycling conditions, bend or coil setup and any documentation needed with delivery.
1550 nm PM-PCF: Match Geometry Before Ordering
The reference table includes 100/135 μm, 125/245 μm and 80/165 μm cladding/coating diameter combinations. Confirm the full part number against the required dimensional variant and an approved drawing; dimensions, beat length and polarization-coupling limits must be reviewed together.
Define a Reproducible PM-PCF Acceptance Record
- Record the 1550 nm test wavelength, source and launched polarization axis.
- Keep the reference lengths separate: crosstalk is listed at 100 m, while temperature-cycle fluctuation is listed at 1 km.
- State coil diameter, bend state, end preparation and whether the sample is bare fiber or connectorized.
- Agree the end-sealing, packaging and splicing procedure to limit moisture or dust entering the microstructured cladding.
A catalog crosstalk value is not automatically a guaranteed PER for a finished connectorized assembly. Use the PER measurement and acceptance guide to define comparable test conditions.
Compare the Fiber Structure and Integration Route
Review the photonic crystal fiber structure and selection guide and the polarization-maintaining fiber guide. For alternatives, compare PANDA PM fiber and hollow-core PCF; confirm core structure from the drawing rather than treating all PCF types as interchangeable.
Technical inquiry: Sales@opticlumos.com · WhatsApp +86 18171497217
