
SC Fiber Optic Connector & Duplex Clip
Quick answer: OpticLumos supplies SC connector components and matching duplex clips for configurable optical terminations. Reference connector models accept 2.2 or 3.0 mm cable and use a ceramic ferrule. Confirm the fiber dimensions, ferrule bore, polish and assembly requirements before ordering.
Use the SC interface for compatible patch panels, distribution interfaces and equipment connections. The connector kit and duplex clip are components; a finished pigtail, patch cord or fanout assembly requires a separate optical and mechanical specification.
Request an SC Configuration QuoteProduct Features
Reference Models & Mechanical Specifications
| Reference code | Component | Cable diameter | Reference construction |
|---|---|---|---|
| P-SC-30-001 | SC connector | 3.0 mm | Ceramic ferrule; crimping / adhesive / polishing assembly |
| P-SC-20-001 | SC connector | 2.2 mm | Ceramic ferrule; crimping / adhesive / polishing assembly |
| P-SC-00-001 | SC duplex clip | Not applicable | Snap-in accessory for matching connector bodies |
Connector kits include the reference crimping ring, tail boot and dust cap. Confirm the actual contents, fiber fit and dimensions in the approved part drawing. The clip is ordered as a separate accessory.
Product & Duplex Clip Images


Photos show representative catalog components. Housing color is not a substitute for an approved fiber, polish or compatibility specification.
Define the Optical Termination Separately
A connector model and cable diameter do not establish insertion loss, return loss, fiber grade or endface polish. For a terminated assembly, agree the following before production:
| Ordering decision | What to confirm |
|---|---|
| Fiber and ferrule | Fiber grade, core/cladding dimensions, coating and required ferrule bore |
| Endface | Specified PC / UPC / APC configuration, subject to the selected part and process |
| Optical acceptance | Insertion-loss and return-loss limits at agreed wavelengths and reference conditions |
| Mechanical fit | Boot, jacket OD, crimp dimensions, length and minimum routing clearances |
| Finished assembly | Simplex or duplex; pigtail, patch cord or fanout; labels and port map |
| Documentation | Approved drawing, inspection criteria and test report for assembled products |
Match the polish at every mating interface. An APC endface must not mate directly to a UPC endface. See the UPC vs APC selection guide for a hybrid-cable example and acceptance workflow.
Applications & Configuration Choices
Use a finished assembly specification when you need a ready-to-install optical lead. For multiple channels, define each port, the branch length and channel identification rather than ordering only a connector count.
If the other equipment uses LC, review a correctly specified SC-to-LC assembly rather than trying to mate the two connector bodies directly. The LC vs SC comparison explains interface matching and hybrid leads.
Frequently Asked Questions
Is this a finished SC patch cord?
This page lists SC connector components and a duplex clip. A terminated pigtail, patch cord or fanout must be specified separately, including fiber, polish, dimensions and optical test limits.
Which cable diameters are listed?
Reference connector models cover 2.2 or 3.0 mm cable. Confirm the selected boot, jacket and crimp fit against the approved drawing.
Does the duplex clip perform the optical connection?
No. It groups two matching SC plugs. The terminated plugs and the correctly specified mating adapter form the optical interface.
What insertion-loss or return-loss value is guaranteed?
No universal finished-assembly IL or RL limit is assigned to the component kit. Confirm the fiber, polish, wavelength, assembly process and acceptance limits in the quotation.
Can I select a connector from housing color alone?
No. Confirm the part number, fiber fit, polish, mechanical interface and equipment requirements. Representative catalog colors do not establish compatibility.
Related Products & Selection Guides
Request an SC Connector Quote
Send the reference model, quantity, fiber dimensions, cable OD, polish and mating-port requirements. For finished assemblies, include lengths, port map and optical acceptance limits.
Send SC Specifications